LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2004 >> GS 430 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission (On-Vehicle Service) >> O/D Direct Clutch Speed Sensor >> On-Vehicle Repair
April 5, 2026: LEMON Manuals is launched! Read the announcement.

On-Vehicle Repair

  1. 3UZ-FE Engine only: REMOVE FRONT EXHAUST PIPE 
    Fig 1: Identifying Exhaust System Components (3UZ-FE)
    G01133388Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. DISCONNECT O/D DIRECT CLUTCH SPEED SENSOR CONNECTOR 
    Fig 2: Identifying O/D Direct Clutch Speed Sensor
    G01343051Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE O/D DIRECT CLUTCH SPEED SENSOR 
    1. Remove the bolt and O/D direct clutch speed sensor.
    2. Remove the O-ring from the O/D direct clutch speed sensor.
  4. INSTALL O/D DIRECT CLUTCH SPEED SENSOR 
    1. Coat a new O-ring with ATF and install it to the O/D direct clutch speed sensor.
    2. Install the O/D direct clutch speed sensor to the transmission case and torque the bolt.

      Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf) 

  5. CONNECT O/D DIRECT CLUTCH SPEED SENSOR CONNECTOR 
  6. 3UZ-FE Engine only: INSTALL FRONT EXHAUST PIPE 
    Fig 3: Identifying Exhaust System Components (3UZ-FE)
    G01133388Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals