LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2004 >> LX 470 >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Ignition Switch & Key Unlock Warning Switch (Inspection) >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ignition Switch & Key Unlock Warning Switch (Inspection): Inspection

  1. INSPECT IGNITION SWITCH CONTINUITY 
    IGNITION SWITCH CONTINUITY

    Switch position Tester connection Specified condition
    LOCK - No continuity
    ACC 2 - 3 Continuity
    ON 2 - 3 - 4
    6 - 7
    Continuity
    START 1 - 2 - 4
    6 - 7 - 8
    Continuity

    If continuity is not as specified, replace the switch.

    Fig 1: Identifying Ignition Switch Terminal
    G03485748Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSPECT IGNITION SWITCH CIRCUIT 

    Connect the switch connector and inspect the connector on wire harness side from the back side, as shown in Fig 2 .

    Fig 2: Inspecting Connector On Wire Harness Side From Back Side
    G03485749Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    IGNITION SWITCH CIRCUIT

    Tester connection Condition Specified condition
    2 - Ground Always Battery positive voltage
    3 - Ground Ignition switch ACC or ON Battery positive voltage
    4 - Ground Ignition switch ON Battery positive voltage
    6 - Ground Ignition switch ON or START Battery positive voltage
    7 - Ground Always Battery positive voltage
    8 - Ground Ignition switch START Battery positive voltage

    If circuit is not as specified, inspect the circuits connected to other parts.

  3. INSPECT IGNITION KEY ILLUMINATION OPERATION 

    Connect the battery positive (+) lead to terminal 2 and the battery negative (-) lead to terminal 6, and check that the indicator light comes on.

    If operation is not as specified, replace the switch.

  4. INSPECT IGNITION KEY ILLUMINATION CIRC. (See  PROBLEM SYMPTOMS TABLE  ) 
    Fig 3: Identifying Indicator Light
    G03485750Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. INSPECT KEY UNLOCK WARNING SWITCH CONTINUITY 
    KEY UNLOCK WARNING SWITCH CONTINUITY

    Switch position Tester connection Specified condition
    OFF (Key removed) - No continuity
    ON (Key set) 1 - 2 Continuity

    If continuity is not as specified, replace the switch.

    Connect the switch connector and inspect the connector on the wire harness side from the back side, as shown in Fig 4 .

    Fig 4: Identifying Key Unlock Warning Switch Position
    G03485751Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. INSPECT KEY UNLOCK WARNING SWITCH CIRCUIT 

    Connect the switch connector and inspect the connector on the wire harness side from the back side, as shown in Fig 5 .

    Fig 5: Inspecting Key Unlock Warning Switch Terminal
    G03485752Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    KEY UNLOCK WARNING SWITCH CIRCUIT

    Tester connection Condition Specified condition
    2 - Ground Always Continuity

    If circuit is not as specified, inspect the circuits connected to other parts.