Height Control Sensor Sub-ASSY Rear RH: Replacement

WARNING: This page is about a different car, the 2005 Lexus RX 330. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE HEIGHT CONTROL SENSOR SUB-ASSY REAR RH
1. Disconnect the connector.
2. Remove the nut and the disconnect the height control sensor link.
  
  Fig 1: Locating Height Control Sensor Link Disconnecting Nut (2WD)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Fig 2: Locating Height Control Sensor Link Disconnecting Nut (4WD)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. 2WD:
  Remove the 2 nuts and the height control sensor sub-assy rear RH.
  
  Fig 3: Locating Height Control Sensor Sub-Assy Rear RH Removing Nuts (2WD)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. 4WD:
  Remove the 2 bolts and the height control sensor sub-assy rear RH.
  
  Fig 4: Locating Height Control Sensor Sub-Assy Rear RH Removing Bolts (4WD)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL HEIGHT CONTROL SENSOR SUB-ASSY REAR RH
1. 2WD:
  Install the height control sensor sub-assy rear RH with the 2 nuts.
  
  Fig 5: Installing Height Control Sensor Sub-Assy Rear RH With 2 Nuts (2WD)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. 4WD:
  Install the height control sensor sub-assy rear RH with the 2 bolts.
  
  Fig 6: Installing Height Control Sensor Sub-Assy Rear Rh With 2 Bolts (4WD)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Install the height control sensor link with the nut.
  Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)
4. Connect the connector.
  
  Fig 7: Locating Height Control Sensor Link Installing Nut (2WD)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Fig 8: Locating Height Control Sensor Link Installing Nut (4WD)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
HEADLIGHT AIM ONLY (See ADJUSTMENT )