Inspection Procedure
WARNING: This page is about a different car, the 2007 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
When the laser sensor is replaced with a new one, adjustment of the laser sensor beam axis must be performed (See ADJUSTMENT
).
- ADJUST LASER SENSOR
Refer to ADJUSTMENT .
HINT:
It is necessary to make the ECM recognize specification information (whether the vehicle is equipped with the dynamic laser cruise control system or not). When this procedure has not been carried out, this DTCs may be output.
- Clear the DTCs and then recheck for DTCs.
OK:
DTC is not output.
NG: REPLACE LASER SENSOR
OK: SYSTEM IS OK
- Clear the DTCs and then recheck for DTCs.