Headlight Assembly: Installation

WARNING: This page is about a different car, the 2008 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL FRONT NO. 2 BUMPER SIDE SUPPORT
1. Engage the 2 claws and install the front No. 2 bumper side support.
INSTALL HEADLIGHT ASSEMBLY (for Halogen Headlight)
1. Connect the connectors.
  
  Fig 1: Locating Front Bumper Side Support No.2 LH Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the headlight assembly as shown in the illustration.
  
  Fig 2: Installing Headlight Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Install the 3 screws.
INSTALL HEADLIGHT ASSEMBLY (for HID Headlight)
1. Connect the connectors.
  
  Fig 3: Identifying Headlight Assembly Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the headlight assembly as shown in the illustration.
  
  Fig 4: Installing Headlight Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Install the bolt and 3 screws.
INSTALL FRONT BUMPER COVER (See INSTALLATION )
VEHICLE PREPARATION FOR HEADLIGHT AIM ADJUSTMENT (See ADJUSTMENT )
PREPARATION FOR HEADLIGHT AIMING (for Using a Tester) (See ADJUSTMENT )
PREPARATION FOR HEADLIGHT AIMING (for Using a Screen) (See ADJUSTMENT )
HEADLIGHT AIMING INSPECTION (See ADJUSTMENT )
HEADLIGHT AIMING ADJUSTMENT (See ADJUSTMENT )

Fig 5: Identifying Headlight Assembly Screws
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002