Height Control Sensor: Removal

WARNING: This page is about a different car, the 2008 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
REMOVE HEIGHT CONTROL SENSOR
1. Disconnect the connector.
2. Remove the nut and separate the height control sensor link.
  
  Fig 1: Locating Height Control Sensor Nut
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. 2WD:
  1. Remove the 2 bolts and the height control sensor.
    
    Fig 2: Locating Height Control Sensor Bolts (2WD)
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. 4WD:
  1. Remove the 2 bolts and the height control sensor.
    
    Fig 3: Locating Height Control Sensor Bolts (4WD)
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002