Inspection Procedure

1. Check if the BLUETOOTH settings are correct.

   OK: BLUETOOTH settings are correct. 

NG: SET SETTINGS CORRECTLY 

OK: GO TO NEXT STEP 

1. Check if the cellular phone is BLUETOOTH capable.

   HINT:

   Some versions of BLUETOOTH capable cellular phone may not be compatible.

   OK: The phone is BLUETOOTH capable. 

NG: END (ONLY A BLUETOOTH CAPABLE CELLULAR PHONE CAN BE USED) 

OK: GO TO NEXT STEP 

1. Check if the cellular phone functions.

   HINT:

   • The cellular phone is unable to call under any of the following conditions.
   • The cellular phone is locked.
   • The directory is being transferred.
   • The line is crossed.
   • Transmission is regulated.
   • The power is off.
   • An emergency call is being made (LEXUS LINK SYSTEM is in operation).
   • The cellular phone is not connected to BLUETOOTH ("BT" is displayed while a connection is present).

     OK: None of the above conditions exists. 

NG: SET SETTING CORRECTLY 

OK: GO TO NEXT STEP 

1. Check if the cellular phone can call.

   HINT:

   When the battery charge is low, calls cannot be made or received.

   OK: The cellular phone can call. 

NG: REPLACE THE CELLULAR PHONE 

OK: GO TO NEXT STEP 

1. Put a cellular phone into a receiving state.
2. Place the cellular phone close to the multi-display.
3. Check if the cellular phone has reception according to the multi-display.

   OK: The cellular phone has reception. 

NG: REPLACE MULTI-DISPLAY (SEE  REPLACEMENT  ) 

OK: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN  PROBLEM SYMPTOMS TABLE