Data List/Active Test

HINT:

Using the hand-held tester's DATA LIST allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the DATA LIST early in troubleshooting is one way to save time.

1. Connect the hand-held tester (with CAN VIM) to the DLC3.
2. Turn the ignition switch ON.
3. Read the DATA LIST on the tester's screen.

Driver door ECU: 

Fig 1: DATA LIST - Driver Door ECU

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Transponder key ECU (w/o Smart key system): 

Fig 2: DATA LIST - Transponder Key ECU (w/o Smart Key System)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Steering lock ECU (w/ Smart key system): 

Fig 3: DATA LIST - Steering Lock ECU (w/ Smart Key System)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

HINT:

Performing the hand-held tester's ACTIVE TEST allows relay, VSV, actuator and other items to be operated without removing any parts. Performing the ACTIVE TEST early in troubleshooting is one way to save time. The DATA LIST can be displayed during the ACTIVE TEST.

1. Connect the hand-held tester (with CAN VIM) to the DLC3.
2. Turn the ignition switch ON.
3. Perform the ACTIVE TEST according to the display on the tester.

Meter ECU: