LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2006 >> GS 430 >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System (3UZ-FE) >> Camshaft Position Sensor >> Inspection
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Camshaft Position Sensor: Inspection

  1. INSPECT CAMSHAFT POSITION SENSOR 
    1. Measure the resistance between the terminals.
      Fig 1: Inspecting Camshaft Position Sensor
      G04027202Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard resistance 

      TEMPERATURE AND SPECIFIED CONDITION CHART

      Temperature Specified Condition
      Cold 835 to 1,400 Ω
      Hot 1,060 to 1,645 Ω
      NOTE: In the table above, the terms "cold" and "hot" refer to the temperature of the coils. "Cold" means approximately -10 to 50°C (14 to 122°F). "Hot" means approximately 50 to 100°C (122 to 212°F).

      If the resistance is not as specified, replace the sensor.

scientia non olet · About LEMON Manuals