How To Proceed With Troubleshooting

NEXT 

NEXT 

1. If the audio system is equipped with a multi-display, check DTCs in the LEXUS NAVIGATION SYSTEM section.
2. If the system cannot enter the diagnosis mode, inspect each AVC-LAN communication signal and repair or replace malfunctioning parts.
3. Check for normal functioning of the audio system.
   1. Without code outputs, proceed to A.
   2. With code outputs, proceed to B.

B : Go to step   5 

A : Go to next step 

1. Check for DTCs and note any codes that are output.
2. Delete the DTC.
3. Recheck for DTCs. Try to prompt the DTC by simulating the original activity that the DTC suggests.
   1. If the DTC does not reoccur, proceed to A.
   2. If the DTC reoccurs, proceed to B.

      HINT:

      Find the output code on the diagnostic trouble code chart.

B : Go to step   7 

A : Go to next step 

1. If the fault is not listed on the PROBLEM SYMPTOMS TABLE , proceed to A.
2. If the fault is listed on the PROBLEM SYMPTOMS TABLE , proceed to B.

B : Go to step   7 

A : Go to next step 

1. Terminals of ECU.

NEXT 

NEXT 

NEXT: END