How To Proceed With Troubleshooting

VEHICLE BROUGHT TO WORK SHOP
1. Go to next step.
CUSTOMER PROBLEM ANALYSIS (See CUSTOMER PROBLEM ANALYSIS CHECK )
1. Go to next step.
CHECK AND CLEAR DTCS (See PRE-CHECK )
PROBLEM SYMPTOM CONFIRMATION
1. SYMPTOM DOES NOT OCCUR (GO TO STEP 5 )
2. SYMPTOM OCCURS (GO TO STEP 6 .)
SYMPTOM SIMULATION (SEE HOW TO PROCEED WITH TROUBLESHOOTING )
1. Go to next step.
DTC CHECK (See PRE-CHECK )
1. MALFUNCTION CODE (GO TO STEP 7 )
2. NORMAL CODE (GO TO STEP 8 .)
See DIAGNOSTIC TROUBLE CODE TABLE
1. GO TO STEP 9 .
See PROBLEM SYMPTOMS TABLE )
1. Go to next step.
CIRCUIT INSPECTION (See CIRCUIT DESCRIPTION to CIRCUIT DESCRIPTION )
1. Go to next step.
See TERMINALS OF ECM
1. Go to next step.
IDENTIFICATION OF PROBLEM
1. Go to next step.
REPAIR OR REPLACE
1. Go to next step.
CONFIRMATION TEST
1. Go to next step.
2. END
  HINT:
  
  Step 3, 6, 9, 13:
  
  Diagnostic steps permitting the use of the hand-held tester.