Height Control Sensor: Installation
WARNING: This page is about a different car, the 2007 Lexus GX 470. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL HEIGHT CONTROL SENSOR SUB-ASSEMBLY REAR LH
- Install the height control sensor with the 2 bolts.
Torque: 13 N*m (133 kgf*cm, 10 ft.*lbf)
- Align the matchmarks on the link and the bracket.
- Connect the sensor link with the nut.
Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
- Connect the connector to the height control sensor.
- Install the height control sensor with the 2 bolts.
- INSTALL REAR DISC WHEEL
Torque: 112 N*m (1,140 kgf*cm, 83 ft.*lbf)
- MEASURE VEHICLE HEIGHT (See ADJUSTMENT )
- ADJUST VEHICLE HEIGHT (See ADJUSTMENT )