Section 25 (Audio / Visual): Multi-Display: Installation

WARNING: This page is about a different car, the 2006 Lexus GS 430 and 2006 Lexus GS 300. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

A bolt without a torque specification is shown in the standard bolt chart (See SPECIFIED TORQUE FOR STANDARD BOLTS ).

INSTALL NO. 2 RADIO BRACKET (See INSTALLATION )
INSTALL NO. 1 RADIO BRACKET (See INSTALLATION )
INSTALL MULTI-DISPLAY WITH RADIO RECEIVER ASSEMBLY (See INSTALLATION )
INSTALL INSTRUMENT PANEL FINISH PANEL END LH (See INSTALLATION )
INSTALL INSTRUMENT PANEL FINISH PANEL END RH (See INSTALLATION )
INSTALL CONSOLE UPPER PANEL ASSEMBLY (See INSTALLATION )
INSTALL FRONT CONSOLE UPPER PANEL GARNISH (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
PERFORM INITIALIZATION
1. Perform initialization (See INITIALIZATION ).
  NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.