LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2006 >> LS 430 >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control System - Diagnostics >> Road Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Road Test

  1. PROBLEM SYMPTOM CONFIRMATION 
    1. Inspect the SET function.
      1. Push the ON-OFF button on.
      2. Drive at the required speed (40 km/h (25 mph) or higher).
      3. Push the cruise control main switch to SET/COAST.
      4. After releasing the switch, check that the vehicle cruises at the set speed.
      Fig 1: Checking SET Function
      G03004501Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Inspect the ACC (ACCEL) switch.
      Fig 2: Checking ACC (ACCEL) Switch
      G03004502Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Push the ON-OFF button on.
      2. Drive at the required speed (40 km/h (25 mph) or higher).
      3. Push the cruise control main switch to SET/COAST.
      4. Check that vehicle speed increases while the cruise control main switch is pushed to RES/ACC, and that the vehicle cruises at the newly set speed when the switch is released.
      5. Momentarily push the cruise control main switch to RES/ACC and then immediately release it. Check that vehicle speed increases by approximately 1.6 km/h (1.0 mph) (Tap-up function).
    3. Inspect the COAST function.
      1. Push the ON-OFF button on.
      2. Drive at the required speed (40 km/h (25 mph) or higher).
      3. Push the cruise control main switch to SET/COAST.
      4. Check that vehicle speed decreases while the cruise control main switch is pushed to SET/ COAST, and the vehicle cruises at the newly set speed when the switch is released.
      5. Momentarily push the cruise control main switch to SET/COAST, and then immediately release it. Check that vehicle speed decreases by approximately 1.6 km/h (1.0 mph) (Tap-down function).
      Fig 3: Checking COAST Function
      G03004503Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Inspect the CANCEL function.
      1. Push the ON-OFF button on.
      2. Drive at the required speed (40 km/h (25 mph) or higher).
      3. Push the cruise control main switch to SET/COAST.
      4. When doing one of the following, check that the cruise control system is cancelled and that the normal driving mode is reset.
      • Depressing the brake pedal
      • Moving the shift lever to any position except D (6th, 5th, and 4th gears)
      • Pushing the ON-OFF button off
      • Pulling the cruise control main switch to CANCEL
      Fig 4: Checking CANCEL Function
      G03004504Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    5. Inspect the RES (RESUME) function.
    1. Push the ON-OFF button on.
    2. Drive at the required speed (40 km/h (25 mph) or higher).
    3. Push the cruise control main switch to SET/COAST.
    4. When doing one of the following, check that the cruise control system is cancelled and that the normal driving mode is reset.
      • Depressing the brake pedal
      • Moving the shift lever to any position except D (6th, 5th, and 4th gears)
      • Pulling the cruise control main switch to CANCEL
    5. After pushing the cruise control main switch to RES/ ACC at a driving speed of more than 40 km/h (25 mph), check that the vehicle restores the speed prior to the cancellation.
    Fig 5: Checking RES (RESUME) Function
    G03004505Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals