Inspection Procedure
- READ VALUE OF HAND-HELD TESTER
- Connect the hand-held tester (with CAN VIM) to the DLC3.
- Turn the ignition switch ON and push the hand-held tester main switch ON.
- Select the item below in the DATA LIST and read the displays on the hand-held tester.
Rear seat control switch:
REAR SEAT CONTROL SWITCH - DATA LISTItem Measurement Item/ Display (Range) Normal Condition RR SLIDE SW Fr Rear RH seat sliding switch signal (Forward)/ ON or OFF ON: Rear RH seat sliding switch (Forward) is ON OFF: Rear RH seat sliding switch (Forward) is OFF RR SLIDE SW Rr Rear RH seat sliding switch signal (Rearward)/ ON or OFF ON: Rear RH seat sliding switch (Rearward) is ON OFF: Rear RH seat sliding switch (Rearward) is OFF RRHDRSTSWUP Rear RH headrest switch signal (Upward)/ ON or OFF ON: Rear RH headrest switch (Upward) is ON OFF: Rear RH headrest switch(Upward) is OFF RRHDRSTSWDWN Rear RH headrest switch signal (Downward)/ ON or OFF ON: Rear RH headrest switch (Downward) is ON OFF: Rear RH headrest switch(Downward) is OFF RR REF START SW Rear RH refreshing seat switch signal (START)/ ON or OFF ON: Rear RH refreshing seat switch (START) is ON OFF: Rear RH refreshing seat switch (START) is OFF RR REF STOP SW Rear RH refreshing seat switch signal (STOP)/ ON or OFF ON: Rear RH refreshing seat switch (STOP) is ON OFF: Rear RH refreshing seat switch (STOP) is OFF RL SLIDE SW Fr Rear LH seat sliding switch signal (Forward)/ ON or OFF ON: Rear LH seat sliding switch (Forward) is ON OFF: Rear LH seat sliding switch (Forward) is OFF RL SLIDE SW Rr Rear LH seat sliding switch signal (Rearward)/ ON or OFF ON: Rear LH seat sliding switch (Rearward) is ON OFF: Rear LH seat sliding switch (Rearward) is OFF RL HDRST SW UP Rear LH headrest switch signal (Upward)/ ON or OFF ON: Rear LH headrest switch (Upward) is ON OFF: Rear LH headrest switch (Upward) is OFF RL HDRST SW DWN Rear LH headrest switch signal (Downward)/ ON or OFF ON: Rear LH headrest switch (Downward) is ON OFF: Rear LH headrest switch (Downward) is OFF RL REF START SW Rear LH refreshing seat switch signal (START)/ ON or OFF ON: Rear LH refreshing seat switch (START) is ON OFF: Rear LH refreshing seat switch (START) is OFF RL REF STOP SW Rear LH refreshing seat switch signal (STOP)/ ON or OFF ON: Rear LH refreshing seat switch (STOP) is ON OFF: Rear LH refreshing seat switch (STOP) is OFF IG Ignition switch status/ ON or OFF ON: Ignition switch is ON OFF: Ignition switch is OFF OK:
On the tester screen, each item should change between ON and OFF according to the above chart.
NG: REPLACE REAR SEAT CONTROL SWITCH
OK: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN ON PROBLEM SYMPTOMS TABLE