Distance Control Ecu: Installation

INSTALL SKID CONTROL BUZZER ASSEMBLY
1. Engage the clamp to install the skid control buzzer assembly.
  
  Fig 1: Engaging Clamp To Install Skid Control Buzzer Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL DISTANCE CONTROL ECU ASSEMBLY WITH SKID CONTROL BUZZER ASSEMBLY
1. Install the distance control ECU assembly with skid control buzzer assembly with the bolt.
  NOTE: Do not install the distance control ECU assembly if it has been damaged or impacted in any way.
  
  Fig 2: Identifying Distance Control ECU Assembly With Skid Control Buzzer Assembly With Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the 2 connectors.
INSTALL HEADLIGHT LEVELING ECU ASSEMBLY (See REMOVAL )
INSTALL INSTRUMENT PANEL FINISH PANEL SUBASSEMBLY LOWER (See INSTALLATION )
INSTALL FRONT DOOR SCUFF LH PLATE (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
PERFORM INITIALIZATION
NOTE: Some systems need initialization when disconnecting the cable from the negative battery terminal. (See INITIALIZATION )

Fig 3: Identifying Connectors
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002