Inspection Procedure
- CHECK MULTI-DISPLAY SWITCH (MULTI-DISPLAY SWITCH)
- Check for foreign matter around the switch that might prevent operation.
OK: No foreign matter is found.
- NG: REMOVE ANY FOREIGN MATTER FOUND
- OK: Go to next step.
- Check for foreign matter around the switch that might prevent operation.
- CHECK OPERATION OF MULTI-DISPLAY SWITCH
- After replacing the multi-display switch with a normally one, check that the panel switch operates.
OK: Panel switch operation returns to normal.
- NG: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE (See PROBLEM SYMPTOMS TABLE )
- OK: END
- After replacing the multi-display switch with a normally one, check that the panel switch operates.