Data List / Active Test

HINT:

Using the intelligent tester's DATA LIST allows switch, sensor, actuator, and other item values to be read without removing any parts. Reading the DATA LIST early in troubleshooting is one way to save time.

1. Connect the intelligent tester to the DLC3.
2. Turn the engine switch on (IG).
3. Enter the following menus: DIAGNOSIS / ENHANCED OBD II / DATA LIST.
4. Read the DATA LIST according to the display on the tester.

   MAIN BODY: 

   DATA LIST CHART
   
   

   Tester Display	Measurement Item/Range	Normal Condition	Diagnostic Note
   D DOR CTY SW	Driver side door courtesy light switch signal/ON or OFF	ON: Driver side door is OPEN OFF: Driver side door is CLOSED	-
   P DOR CTY SW	Passenger side door courtesy light switch signal/ON or OFF	ON: Passenger side door is OPEN OFF: Passenger side door is CLOSED	-
   RR DOR CTY SW	Rear right door courtesy light switch signal/ON or OFF	ON: Rear right door is OPEN OFF: Rear right door is CLOSED	-
   RL DOR CTY SW	Rear left door courtesy light switch signal/ON or OFF	ON: Rear left door is OPEN OFF: Rear left door is CLOSED	-
   D LOCK POS SW	Driver side door lock position switch signal/ON or OFF	ON: Driver side door is unlocked OFF: Driver side door is locked	-
   P LOCK POS SW	Front passenger side door lock position switch signal/ON or OFF	ON: Front passenger side door is unlocked OFF: Front passenger side door is locked	-
   RR LOCK POS SW	Rear right door lock position switch signal/ON or OFF	ON: Rear right door is unlocked OFF: Rear right door is locked	-
   RL LOCK POS SW	Rear left door lock position switch signal/ON or OFF	ON: Rear left door is unlocked OFF: Rear left door is locked	-
   LUGG COURTSY SW	Luggage compartment door courtesy light switch signal/ON or OFF	ON: Luggage compartment door is OPEN OFF: Luggage compartment door is CLOSED	-
   D/L SW-LOCK	Door control switch lock signal/ ON or OFF	ON: Door control switch is pushed to lock position OFF: Door control switch is not pushed to lock position	-
   D/L SW-UNLOCK	Door control switch unlock signal/ ON or OFF	ON: Door control switch is pushed to unlock position OFF: Door control switch is not pushed to unlock position	-
   DOR KEY SW-LOCK	Driver door lock/unlock switch lock signal (key-linked lock switch)/ON or OFF	ON: Driver side door key cylinder is turned to lock position OFF: Driver side door key cylinder is turned to unlock position	-
   DOR KEY SW-ULCK	Driver door lock/unlock switch unlock signal (key-linked unlock switch)/ON or OFF	ON: Driver side door key cylinder is turned to unlock position OFF: Driver side door key cylinder is turned to lock position	-
   D DOR KEY SW-UL	Driver door lock/unlock switch unlock signal (2 times key-linked unlock switch)/ON or OFF	ON: Driver side door key cylinder is turned to unlock position OFF: Driver side door key cylinder is turned to lock position	-

HINT:

Performing the intelligent tester's ACTIVE TEST allows relays, VSVs, actuators, and other items to be operated without removing any parts. Performing the ACTIVE TEST early in troubleshooting is one way to save time. The DATA LIST can be displayed during the ACTIVE TEST.

1. Connect the intelligent tester to the DLC3.
2. Turn the engine switch on (IG).
3. Enter the following menus: DIAGNOSIS / ENHANCED OBD II / ACTIVE TEST.
4. Perform the ACTIVE TEST according to the display on the tester.

   MAIN BODY: 

   ACTIVE TEST CHART
   
   

   Tester Display	Test Part	Control Range	Diagnostic Note
   DOOR LOCK	Operate door lock motor	LOCK/UNLOCK	-
   D DOOR UNLOCK	Operate driver door lock motor	LOCK/UNLOCK	-
   SHOCK UNLOCK	Operate collision door lock release function	LOCK/UNLOCK	-
   TRUNK/BDOR OPEN	Operate luggage compartment door lock motor	UNLOCK	-