LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> GS 430 >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Transfer Case) >> Transfer Control Solenoid >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Transfer Control Solenoid: Inspection

WARNING: This page is about a different car, the 2007 Lexus GS 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT TRANSFER CONTROL SOLENOID 
    1. Connect the battery's positive (+) terminal and a bulb of 12V - 21W to terminal 1 as shown in the illustration.
    2. Connect the battery's negative (-) terminal to terminal 2 and check if the solenoid operates.

      OK: 

      The solenoid operates and operating sound is heard. 

    3. Measure the resistance according to the value(s) in the table below.

      Resistance 

      TESTER CONNECTION SPECIFIED CONDITION CHART

      Tester Connection Condition
      Terminal 1 - Terminal 2 5.0 to 5.5 Ω

    If the resistance is not within the specified range, replace the transfer control solenoid.

    Fig 1: Inspecting Transfer Control Solenoid
    G05295961Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals