Inspection Procedure

1. Select the ACTIVE TEST, use the intelligent tester (with CAN VIM) to generate a control command, and then check that the CRUISE main indicator light illuminates.

   Combination meter 

   ITEM MEASUREMENT CONDITIONS
   
   

   Item	Test Details
   CRUISE INDIC	CRUISE main indicator light is ON / OFF

   OK: 

   Indicator light turns on / turns off. 

NG: GO TO METER / GAUGE SYSTEM  (see HOW TO PROCEED WITH TROUBLESHOOTING )

OK: GO TO Next Step 

1. Check the DATA LIST for proper functioning of the CRUISE main indicator light.

   Hybrid vehicle control ECU 

   ITEM MEASUREMENT CONDITIONS
   
   

   Item	Measurement Item / Display (Range)	Normal Condition
   CCS INDICATOR M-CPU	Cruise indicator signal (Main CPU) / ON or OFF	ON: "CCS READY" ON OFF: "CCS READY" OFF

   OK: 

   When cruise control main switch operation is performed, the result will be same as above. 

NG: REPLACE CRUISE CONTROL MAIN SWITCH 

OK: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN  PROBLEM SYMPTOMS TABLE