Data List / Active Test
- READ DATA LIST
HINT:
Using the intelligent tester's DATA LIST allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the DATA LIST early in troubleshooting is one way to save time.
- Connect the intelligent tester (with CAN VIM) to the DLC3.
- Turn the power switch ON (IG).
- Read the DATA LIST according to the display on the tester.
Hybrid vehicle control ECU
ITEM MEASUREMENT CONDITIONSItem Measurement Item / Display (Range) Normal Condition CCS VEHICLE SPD Vehicle speed / min.: 0 km/h (0 mph), max.: 255 km/h (158 mph) Actual vehicle speed CCS MEM VEHICLE SPD Cruise control memorized speed / min.: 0 km/h (0 mph), max.: 255 km/h (158 mph) Actual stored vehicle speed CRUISE CONTROL Cruise control system active condition / ON or OFF ON: Cruise control activated
OFF: Cruise control inactivatedCCS MAIN SW M-CPU Main switch signal (Main CPU) / ON or OFF ON: Main switch ON (Pushed on)
OFF: Main switch OFF (Pushed off)CCS READY M-CPU Cruise control system standby condition (Main CPU) / ON or OFF Each time main switch is pushed, ON is displayed and then OFF is displayed CCS INDICATOR M-CPU Cruise indicator signal (Main CPU) / ON or OFF ON: "CCS READY" ON
OFF: "CCS READY" OFFCANCEL SW CANCEL switch signal / ON or OFF ON: CANCEL switch ON
OFF: CANCEL switch OFFSET/COAST SW SET / COAST switch signal / ON or OFF ON: SET / COAST switch ON
OFF: SET / COAST switch OFFRES/ACC SW RES/ACC switch signal/ ON or OFF ON: RES / ACC switch ON
OFF: RES/ACC switch OFFSTP LIGHT SW M-CPU Stop light switch signal (Main CPU) / ON or OFF ON: Brake pedal depressed
OFF: Brake pedal released
- PERFORM ACTIVE TEST
HINT:
Performing the intelligent tester's ACTIVE TEST allows relay, VSV, actuator and other items to be operated without removing any parts. Performing the ACTIVE TEST early in troubleshooting is one way to save time.
The DATA LIST can be displayed during the ACTIVE TEST.