Inspection Procedure
- PERFORM ACTIVE TEST BY INTELLIGENT TESTER (CRUISE CONTROL INDICATOR LIGHT)
- Select the ACTIVE TEST, use the intelligent tester (with CAN VIM) to generate a control command, and then check that the combination meter operates.
Combination meter
ITEM MEASUREMENT CONDITIONSItem Test Details CRUISE INDIC CRUISE main indicator light is ON / OFF OK:
Indicator light turns on.
NG: GO TO METER / GAUGE SYSTEM (see HOW TO PROCEED WITH TROUBLESHOOTING )
OK: GO TO Next Step
- Select the ACTIVE TEST, use the intelligent tester (with CAN VIM) to generate a control command, and then check that the combination meter operates.
- READ VALUE OF INTELLIGENT TESTER (CRUISE CONTROL INDICATOR LIGHT)
- Check the DATA LIST for proper functioning of the CRUISE main indicator light.
Hybrid vehicle control ECU
ITEM MEASUREMENT CONDITIONSItem Measurement Item / Display (Range) Normal Condition CCS READY M-CPU Cruise control system standby condition (Main CPU) / ON or OFF Each time main switch is pushed, ON is displayed and then OFF is displayed CCS INDICATOR M-CPU Cruise indicator signal (Main CPU) / ON or OFF ON : "CCS READY" ON
OFF : "CCS READY" OFFOK:
When cruise control main switch operation is performed, the result will be same as above.
NG: REPLACE HYBRID VEHICLE CONTROL ECU
OK: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE
- Check the DATA LIST for proper functioning of the CRUISE main indicator light.