Data List/Active Test
- READ DATA LIST
HINT:
Using the intelligent tester's DATA LIST allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the DATA LIST early in troubleshooting is one way to save time.
- Connect the intelligent tester (with CAN VIM) to the DLC3.
- Turn the engine switch on (IG).
- Read the DATA LIST.
SMART
DATA LISTItem Measurement Item/Display (Range) Normal Condition Diagnostic Note IG SW Engine switch on (IG) signal / ON or OFF ON: Engine switch on (ACC, IG) or start
OFF: Engine switch off- ACC SW Engine switch on (ACC) signal / ON or OFF ON: Engine switch on (ACC, IG) or start
OFF: Engine switch off- IMMOBILIZER Immobilizer system status / SET or UNSET SET: Key is not in cabin
UNSET: Key is in cabin- MASTER KEY Master key code signal / MATCH or NO MATCH MATCH: Master key code is sent
NO MATCH: Unmatched master key code is sent- SUB KEY Sub-key (Master key) code signal / MATCH or NO MATCH MATCH: Sub-key (master key) code is sent
NO MATCH: Unmatched sub-key (master key) code is sent- ENCRYPT CODE Transponder chip signal / OK or NG OK: Correct data sent
NG: Incorrect data sent- SERIAL NUMBER Transponder chip signal / OK or NG OK: Correct data sent
NG: Incorrect data sent- FRAME Transponder chip signal / OK or NG OK: Correct data sent
NG: Incorrect data sent- RESPONSE Transponder chip signal / OK or NG OK: Correct data sent
NG: Incorrect data sent- BCC Transponder chip signal / OK or NG OK: Correct data sent
NG: Incorrect data sent- STATUS Transponder chip data / OK or NG OK: Correct data sent
NG: Incorrect data sent- - PERFORM ACTIVE TEST
HINT:
Perform the intelligent tester's ACTIVE TEST allows relay, VSV, actuator and other items to be operated without removing any parts. Performing the ACTIVE TEST early in troubleshooting is one way to save time. The DATA LIST can be displayed during the ACTIVE TEST.
- Connect the intelligent tester (with CAN VIM) to the DLC3.
- Turn the engine switch on (IG).
- Perform the ACTIVE TEST by following the directions on the tester screen.
SMART
ACTIVE TESTItem Test Details Diagnostic Note SECURITY INDIC Turn security indicator ON/OFF -