Inspection Procedure

1. Connect the intelligent tester to the DLC3.
2. Turn the ignition switch on and turn the intelligent tester main switch on.
3. Check the CRUISE main indicator light by performing the ACTIVE TEST.

   Combination meter: 

   COMBINATION METER REFERENCE TABLE
   
   

   Item	Test Details	Diagnostic Note
   CRUISE INDIC	Turns CRUISE main indicator light ON/OFF	-

   OK: 

   Indicator light comes on/goes off. 

NG: REPLACE COMBINATION METER ASSEMBLY 

OK: Go to Next Step 

1. Connect the intelligent tester to the DLC3.
2. Turn the ignition switch on and turn the intelligent tester main switch on.
3. Check the DATA LIST for proper functioning of the CRUISE main indicator light.

   ECM (Cruise control): 

   NORMAL CONDITION TABLE
   
   

   Item	Measurement Item/Display (Range)	Normal Condition	Diagnostic Note
   CCS INDICATOR M	Cruise indicator signal (Main CPU)/ON or OFF	ON: "CRUISE" on OFF: "CRUISE" off	-

   OK: 

   When the cruise control main switch is operated, the display changes as shown above. 

NG: REPLACE ECM 

OK: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE