Distance Control Ecu: Removal

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait for 90 seconds after disconnecting the cable to prevent the airbag working. (See AIRBAG SYSTEM )
REMOVE FRONT DOOR SCUFF LH PLATE (See REMOVAL )
REMOVE INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LOWER (See REMOVAL )
REMOVE HEADLIGHT LEVELING ECU ASSEMBLY (See REMOVAL )
REMOVE DISTANCE CONTROL ECU ASSEMBLY WITH SKID CONTROL BUZZER ASSEMBLY
1. Disconnect the 2 connectors.
  
  Fig 1: Disconnecting Connectors
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the bolt and distance control ECU assembly with skid control buzzer assembly.
Fig 2: Removing Distance Control ECU Assembly With Skid Control Buzzer Assembly With Bolt
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE SKID CONTROL BUZZER ASSEMBLY
1. Disengage the clamp and remove the skid control buzzer assembly from the distance control ECU assembly.
  
  Fig 3: Removing Skid Control Buzzer Assembly From Distance Control ECU Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002