LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> RX 400h AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 191 (Engine Control System (2UZ-FE)) >> ECM >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Section 191 (Engine Control System (2UZ-FE)): ECM: Installation

WARNING: This page is about a different car, the 2007 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL ECM ASSEMBLY 
    1. Install the ECM with the 3 screws.

      Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf) 

    2. Connect the 5 ECM connectors.
    NOTE: Be sure to securely connect the connectors.
    Fig 1: Locating Screws And ECM
    G05196951Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL NO. 2 FINISH PANEL LOWER 
    1. Install the No. 2 finish panel lower with the 3 screws.
    Fig 2: Locating Screws And No. 2 Finish Panel Lower
    G05196950Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL GLOVE BOX COMPARTMENT DOOR 
    1. Install the glove compartment door with the 2 screws.
  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  5. PERFORM  INITIALIZATION 
    NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
    Fig 3: Locating Screws And Glove Compartment Door
    G05196949Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals