Ignition Switch: Installation

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL IGNITION OR STARTER SWITCH ASSEMBLY
1. Engage the 2 claws and install the ignition or starter switch assembly.
2. Connect the connector.
  
  Fig 1: Locating Ignition Or Starter Switch Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL STEERING COLUMN COVER
1. Install the screw.
  
  Fig 2: Locating Steering Column Cover Screw
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Turn the steering wheel to the left and install the screw.
  
  Fig 3: Locating Steering Wheel Screw (1 Of 2)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Turn the steering wheel to the right, and install the screw indicated in Fig 4 .
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)

Fig 4: Locating Steering Wheel Screw (2 Of 2)
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002