Rear Speed Sensor: Removal

WARNING: This page is about a different car, the 2008 Toyota FJ Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
REMOVE REAR WHEEL
REMOVE REAR SPEED SENSOR
1. Disconnect the skid control sensor wire.
2. Remove the nut and rear speed sensor.
  NOTE:
  - Do not attach any foreign matter to the sensor tip.
  - Ensure that no foreign matter enters the sensor installation part.
    
    Fig 1: Identifying Rear Speed Sensor Wire Connector And Bolt
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002