Back Window Lock: Inspection
WARNING: This page is about a different car, the 2008 Toyota FJ Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT BACK WINDOW LOCK
- Check the operation of the back window lock actuator.
- Connect the cable from the positive (+) battery lead to terminal 4 and the negative (-) battery lead to terminal 3, then check the operation of the actuator.
Standard:
Actuator operates to unlock back window.
If the result is not as specified, replace the back window lock.
- Connect the cable from the positive (+) battery lead to terminal 4 and the negative (-) battery lead to terminal 3, then check the operation of the actuator.
- Check the resistance of the back door window courtesy switch.
- Using an ohmmeter, measure the resistance between the terminals when the latch is operated with a screwdriver.
Standard Resistance
TESTER CONNECTION SPECIFIED CONDITIONTester Connection Condition Specified Condition 1 - 2 Unlocked Below 1 Ω 1 - 2 Locked 10 kΩ or higher If the result is not as specified, replace the back window lock.
- Using an ohmmeter, measure the resistance between the terminals when the latch is operated with a screwdriver.
- Check the operation of the back window lock actuator.