Back Window Lock: Installation

WARNING: This page is about a different car, the 2008 Toyota FJ Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL BACK WINDOW LOCK
1. Install the back window lock with the 3 bolts.
  Torque: 5.0 N*m (51 kgf*cm, 44 in.*lbf)
  
  Fig 1: Identifying Back Window Lock Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the connector and clamp.
INSTALL BACK DOOR SERVICE HOLE COVER (See REASSEMBLY )
INSTALL BACK DOOR TRIM BOARD (See REASSEMBLY )
INSTALL DOOR TRIM RETAINER CAP (See REASSEMBLY )
INSTALL BACK DOOR TRIM COVER RH (See REASSEMBLY )
INSTALL BACK DOOR TRIM COVER LH
HINT:

Use the same procedure as for the RH side.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 N*m (40 kgf*cm, 35 in.*lbf)