Window Defogger Switch: Installation

WARNING: This page is about a different car, the 2008 Toyota FJ Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY
1. Engage the 4 clips and install the integration control and panel.
2. Install the 2 screws.
Fig 1: Identifying Integration Control Assembly Screws
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL INSTRUMENT PANEL GARNISH LH (See INSTALLATION )
INSTALL INSTRUMENT PANEL GARNISH RH (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 N*m (40 kgf*cm, 35 in.*lbf)