Engine Coolant Temperature Sensor: Installation

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL ENGINE COOLANT TEMPERATURE SENSOR
1. Provisionally install the engine coolant temperature sensor through a new gasket.
2. Using SST, tighten the engine coolant temperature sensor.
  SST 09817-33190
  
  Torque: 20 N*m (204 kgf*cm, 15 ft.*lbf)
  
  Fig 1: Identifying Engine Coolant Temperature Sensor
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Connect the engine coolant temperature sensor connector.
Fig 2: Identifying Engine Coolant Temperature Sensor Connector
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
ADD ENGINE COOLANT (See REPLACEMENT )
CHECK FOR ENGINE COOLANT LEAKAGE (See ON-VEHICLE INSPECTION )