Cruise Control Main Switch: Removal

WARNING: This page is about a different car, the 2006 Lexus RX 400h. However, it is still accessible from the selected car via links, so may be relevant.

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait for 90 seconds after disconnecting the cable to prevent the airbag working. (See AIRBAG SYSTEM )
REMOVE STEERING WHEEL NO.3 COVER LOWER (See ON-VEHICLE INSPECTION )
REMOVE STEERING WHEEL NO.2 COVER LOWER (See ON-VEHICLE INSPECTION )
REMOVE STEERING PAD (See REMOVAL )
REMOVE CRUISE CONTROL MAIN SWITCH
1. Disconnect the connector.
2. Remove the 2 screws.
  
  Fig 1: Identifying Cruise Control Main Switch Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Pull the cruise control main switch in the arrow direction to remove it.
  
  Fig 2: Pulling Cruise Control Main Switch
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002