Height Control Accumulator: Disposal
WARNING: This page is about a different car, the 2006 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
- DISPOSE OF HEIGHT CONTROL ACCUMULATOR ASSEMBLY
- Place the accumulator in a vise and saw a hole between "A" and "B" shown in Fig 1
using a saw to discharge the gas inside.CAUTION:
- Before the gas discharging, loosen the bleeder plug to bleed high pressure oil.
- The gas discharging is colorless, odorless and harmless.
- Saw a hole while covering the saw with a cloth because chips may fly up.
- Place the accumulator in a vise and saw a hole between "A" and "B" shown in Fig 1
using a saw to discharge the gas inside.