April 5, 2026: LEMON Manuals is launched! Read the announcement.

Customize Parameters

CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER (REFERENCE)

HINT:

The following items can be customized.

NOTE:

When the customer requests a change in a function, first make sure that the function(s) can be customized.
Be sure to record the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.

A/C amplifier

CUSTOMIZE PARAMETERS

Display (Item)	Default	Contents	Setting
SET TEMP SHIFT (Shift Set Temperature)	NORMAL	Function to control with shifted temperature against display temperature.	+2C / +1C / NORMAL -1C / -2C
AIR INLET MODE (Air Inlet Mode)	AUTO	When turning A/C ON when you desire to cool compartment down quickly, this function changes mode automatically to RECIRCULATED mode.	MANUAL/AUTO
COMPRESSOR MODE (Compressor Mode)	AUTO	Function to turn A/C ON automatically by pressing AUTO button when the blower is ON and the A/C is OFF.	MANUAL/AUTO
COMPRS/DEF OPER (Compressor / DEF Operation)	LINK	Function to turn A/C ON automatically linking with FRONT DEF button when A/C is OFF.	NORMAL / LINK
AIR INLET OPER (Air Inlet (PSVW LOCK) operation)	LINK	Function to change mode automatically to OUTSIDE AIR mode from RECIRCULATED mode linking with A/C button in case of A/C breakdown, etc.	NORMAL / LINK
GAS SENS SHIFT (Emission Gas Sensor Shift)	NORMAL	Function to change sensitivity of exhaust gas sensor.	MU MORE / MORE / LI MORE / NORMAL / LI LESS / LESS / MU LESS
FOOT AOUT OPER (Foot Air Out Operation)	ON	Function to turn air flow from lap-jet ON automatically when retractable hard top is housed	OFF / ON
FOOT/DEF MODE (FOOT/DEF Auto Mode)	ON	Function to turn air flow from FOOT / DEF ON automatically when AUTO MODE is ON	OFF / ON