LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> ES 350 >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (Lighting) >> Light Failure Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Light Failure Sensor: Removal

WARNING: This page is about a different car, the 2007 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE LUGGAGE COMPARTMENT FLOOR MAT 
  2. REMOVE SPARE WHEEL COVER 
  3. REMOVE SPARE WHEEL COVER TRAY 
  4. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY  (See ON-VEHICLE INSPECTION )
  5. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK  (See DISASSEMBLY )
  6. REMOVE REAR FLOOR FINISH PLATE  (See DISASSEMBLY )
  7. REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER LH  (See DISASSEMBLY )
  8. REMOVE LIGHT FAILURE SENSOR 
    1. Disengage the connector.
    2. Disengage the clamp and remove the light failure sensor.
      Fig 1: Locating Light Failure Sensor Connector
      G05252547Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals