LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> ES 350 >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (Lighting) >> Stop Light Switch >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Stop Light Switch: Installation

WARNING: This page is about a different car, the 2007 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL STOP LIGHT SWITCH ASSEMBLY  (See INSTALLATION )
  2. INSTALL COMBINATION METER ASSEMBLY  (See REASSEMBLY )
  3. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY  (See INSTALLATION )
  4. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY  (See INSTALLATION )
  5. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY  (See INSTALLATION )
  6. INSTALL INSTRUMENT PANEL FINISH PANEL END LH  (See INSTALLATION )
  7. INSTALL SIDE INSTRUMENT PANEL LH  (See INSTALLATION )
  8. INSTALL FRONT DOOR OPENING TRIM COVER LH  (See INSTALLATION )
  9. INSTALL FRONT DOOR SCUFF PLATE LH  (See INSTALLATION )
  10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  11. INSPECT SRS WARNING LIGHT 

    (See DIAGNOSIS SYSTEM ).

  12. PERFORM INITIALIZATION 
    NOTE: Some systems need initialization after reconnecting the cable to the negative battery terminal (See INITIALIZATION ).
scientia non olet · About LEMON Manuals