LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> GS 350 AWD >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control >> Cruise Control System >> Road Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Road Test

  1. PROBLEM SYMPTOM CONFIRMATION 
    1. Inspect SET function.
      1. Turn the main switch ON.
      2. Drive at the required speed (40 km/h (25 mph) or higher).
      3. Push the cruise control main switch to SET / COAST.
      4. After releasing the switch, check that the vehicle cruises at the set speed.
        Fig 1: Inspecting SET Function
        G05195907Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Inspect the ACCELERATION function.
      1. Turn the main switch ON.
      2. Drive at the required speed (40 km/h (25 mph) or higher).
      3. Push the cruise control main switch to SET / COAST.
        Fig 2: Inspecting ACCELERATION Function
        G04830973Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      4. Check that vehicle speed increases while the cruise control main switch is pushed to RES / ACC, and that the vehicle cruises at the newly set speed when the switch is released.
      5. Momentarily push the cruise control main switch to RES / ACC and then immediately release it. Check that vehicle speed increases by approximately 1.6 km/h (1.0 mph) (tap-up control).
    3. Inspect the COAST function.
      1. Turn the main switch ON.
      2. Drive at the required speed (40 km/h (25 mph) or higher).
      3. Push the cruise control main switch to SET / COAST.
      4. Check that vehicle speed decreases while the cruise control main switch is pushed to SET/ COAST, and the vehicle cruises at the newly set speed when the switch is released.
      5. Momentarily push the cruise control main switch to SET / COAST, and then immediately release it. Check that vehicle speed decreases by approximately 1.6 km/h (1.0 mph) (tap-down control).
        Fig 3: Inspecting COAST Function
        G04830972Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Inspect the CANCEL function.
      1. Turn the main switch ON.
      2. Drive at the required speed (40 km/h (25 mph) or higher).
      3. Push the cruise control main switch to SET / COAST.
        Fig 4: Inspecting CANCEL Function
        G04830975Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      4. When performing one of the following, check that the cruise control system is canceled and that the normal driving mode is reset.
        • Depressing the brake pedal
        • Moving the shift lever to any position except D or S (6th, 5th, and 4th gear) (for 2GR-FSE)
        • Moving the shift lever to any position except D or S (8th, 7th, 6th, 5th, and 4th gear) (for 1UR-FSE)
        • Turning the main switch OFF
        • Pulling the cruise control main switch to CANCEL
    5. Inspect the RES (RESUME) function.
      1. Turn the main switch ON.
      2. Drive at the required speed (40 km/h (25 mph) or higher).
      3. Push the cruise control main switch to SET / COAST.
      4. Cancel the cruise control system according to any of the above operations (other than turning the main switch OFF).
      5. After pushing the cruise control main switch to RES / ACC at a driving speed of more than 40 km/h (25 mph), check that the vehicle drives at the set speed.
        Fig 5: Inspecting RES (RESUME) Function
        G04830973Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals