Speed Sensor: Removal

WARNING: This page is about a different car, the 2008 Lexus GS 460. However, it is still accessible from the selected car via links, so may be relevant.

DRAIN AUTOMATIC TRANSMISSION FLUID (See REMOVAL )
REMOVE AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY (See REMOVAL )
REMOVE VALVE BODY OIL STRAINER ASSEMBLY (See REMOVAL )
REMOVE TRANSMISSION VALVE BODY ASSEMBLY (See REMOVAL )
REMOVE SPEED SENSOR NT
1. Disconnect the sensor connector.
2. Using a T30 "TORX" wrench, remove the bolt and speed sensor from the oil pump.
3. Remove the O-ring from the speed sensor.
  
  Fig 1: Locating Speed Sensor NT Connector And Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE SPEED SENSOR NC3
1. Disconnect the sensor connector.
2. Remove the bolt and speed sensor from the transmission case.
  
  Fig 2: Locating Speed Sensor NC3 Connector And Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE SPEED SENSOR SP2
1. Disconnect the sensor connector.
2. Remove the bolt and speed sensor from the transmission case.
  
  Fig 3: Locating Speed Sensor NP2 Connector And Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002