LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> GS 460 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (1UR-FSE) - Circuit Tests And Repair Information >> Heated Oxygen Sensor >> Inspection
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Heated Oxygen Sensor: Inspection

  1. INSPECT OXYGEN SENSOR 
    1. Measure the resistance according to the value(s) in the table below.

      Standard resistance 

      TESTER CONNECTIONS SPECIFIED CONDITIONS CHART

      Tester Connection Condition Specified Condition
      1 (HT) - 2 (+B) 20°C (68°F) 11 to 16 Ω

      If the result is not as specified, replace the sensor.

      Fig 1: Identifying Oxygen Sensor Connector
      G04943115Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals