Steering Pad Switch: Removal: Notes
- SEPARATE BATTERY NEGATIVE TERMINAL
- REMOVE STEERING WHEEL COVER LOWER NO. 2 (See REMOVAL )
- REMOVE STEERING WHEEL COVER LOWER NO. 3 (See REMOVAL )
- REMOVE STEERING PAD ASSEMBLY (See REMOVAL )
- REMOVE STEERING PAD SWITCH LH (without Navigation System)
- Disconnect the connector.
- Disconnect the connector of cruise control main switch.
- Remove the screw.
- Disengage the meshing of 2 pins and remove the steering pad switch LH.
- REMOVE STEERING PAD SWITCH LH (with Navigation System)
- Disconnect the connector.
- Disconnect the connector of cruise control main switch.
- Remove the screw.
- Remove the clamp
- Disengage the 2 pins and release the steering pad switch LH from the steering wheel.
- Release the tab of steering pad switch cable from the steering pad switch LH as shown in the illustration.
- Disengage the 2 claws as shown in the illustration and open the latch on the top of the connector.
- Pull out the connector while pinching the latch with fingers and disconnect the steering pad switch cable from the steering pad switch LH.
- REMOVE STEERING PAD SWITCH RH
- Remove the screw.
- Remove the clamp.
- Disengage the 2 pins and release the steering pad switch RH from the steering wheel.
- Release the tab of steering pad switch cable from the steering pad switch RH as shown in the illustration.
- Disengage the 2 claws as shown in the illustration and open the latch on the top of the connector
- Pull out the connector while pinching the latch with fingers and disconnect the steering pad switch cable from the steering pad switch RH.