Installation

BRAKE CONTROL: SKID CONTROL ECU (w/ VDIM):

INSTALLATION

1. INSTALL SKID CONTROL ECU






(a) Install the skid control ECU with the 3 screws.
Torque: 4.8 Nm (49 kgf-cm, 42 in-lbf)
- Align positioning boss (A) of the blower assembly with the hole of the skid control ECU.
- Securely engage the hook (B) of the skid control ECU with the blower assembly.





(b) Connect the 3 connectors to the skid control ECU.
2. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

3. CHECK AND CLEAR DTC Vehicle Stability Control System (w/ VDIM)