Light Control Rheostat: Installation

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL LIGHT CONTROL RHEOSTAT
1. Engage the 2 claws and install the light control rheostat.
  
  Fig 1: Identifying Light Control Rheostat
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the finish panel No. 2 retainer with switch with the 3 screws.
Fig 2: Locating Screws And Finish Panel No. 2 Retainer
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (See INSTALLATION )
INSTALL SIDE INSTRUMENT PANEL LH (See INSTALLATION )
INSTALL FRONT DOOR OPENING TRIM COVER LH (See INSTALLATION )
INSTALL FRONT DOOR SCUFF PLATE LH (See INSTALLATION )