LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> IS 350 >> Repair and Diagnosis >> Steering >> Manual Steering >> Power Steering >> Electronic Power Steering System >> DTC Check/Clear
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

DTC Check/Clear

  1. CHECK FOR DTCS 
    1. Connect the Techstream (with CAN VIM) to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the Techstream on.
    4. Read the DTCs. Enter the following menus: Chassis / EMPS / Trouble Codes.
    5. Confirm the details of the DTCs (See DIAGNOSTIC TROUBLE CODE CHART  ).
  2. CLEAR DTCS 
    1. Connect the Techstream (with CAN VIM) to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the Techstream on.
    4. Clear the DTCs. Enter the following menus: Chassis / EMPS / Trouble Codes.
    5. According to the display on the Techstream, select the trouble code data display with the clear button.
scientia non olet · About LEMON Manuals