Installation

OTHER SYSTEM: INVERTER MAIN SWITCH: INSTALLATION

INSTALLATION





1. INSTALL MAIN SWITCH ASSEMBLY
(a) Attach the 2 claws to install the main switch.
2. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY Installation

3. INSTALL NO. 1 INSTRUMENT CLUSTER MOULDING Installation

4. INSTALL INSTRUMENT SIDE PANEL LH Installation

5. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Installation

6. INSTALL STEERING COLUMN COVER Installation

7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
8. REMOVE COWL TOP VENTILATOR LOUVER RH Installation

9. PERFORM INITIALIZATION
(a) Perform initialization Repair Instruction - Initialization.
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.