LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> LS 460L >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Cellular Communication >> LEXUS Link System >> DTC 4-2 Green LED Error >> Inspection Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection Procedure

  1. CHECK HARNESS AND CONNECTOR (MAYDAY ECU - MAP LIGHT (MAYDAY SWITCH)) 
    1. Disconnect the R23 ECU connector.
      2. Fig 1: Identifying R23 ECU And X6 Map Light Connector Terminals
      G04945805Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disconnect the X6 map light connector.
    3. Measure the resistance according to the value (s) in the table below.

      Standard resistance 

      TESTER CONNECTION SPECIFIED CONDITION REFERENCE CHART

      Tester Connection Condition Specified Condition
      R23-11 (IND2) - X6-5 (IND2) Always Below 1 Ω
      R23-11 (IND2) or X6-5 (IND2) - Body ground Always 10 kΩ or higher

    NG: REPAIR OR REPLACE HARNESS OR CONNECTOR THEN CLEAR HISTORIC DTC 

    OK: Go to Next Step 

  2. CHECK MAP LIGHT ASSEMBLY (GREEN LED OPERATION) 
    1. Temporarily replace the map light with a new or normally functioning one for standard body (see REMOVAL ) or long body (see REMOVAL ).
    2. Check that the system operates normally.

      OK: Green LED operates normally. 

    NG: REPLACE MAYDAY ECU TOGETHER WITH MAYDAY BATTERY AND THEN PERFORM REGISTRATION 

    OK: END (MAP LIGHT (GREEN LED) IS FAULTY; CLEAR HISTORIC DTC) 

scientia non olet · About LEMON Manuals