LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> LS 460L >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Pre-Collision >> Driver Monitor Camera >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Driver Monitor Camera: Installation

  1. INSTALL DRIVER MONITOR CAMERA 
    1. Attach the claws to install the camera.
      Fig 1: Identifying Camera
      G04950909Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the camera with the 3 screws.

      Torque: 1.8 N*m (18 kgf*cm, 16 in.*lbf) 

      Fig 2: Identifying Driver Monitor Camera Screws
      G04950907Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL DRIVER MONITOR BRACKET 
    1. Attach the claw to install the bracket.
    2. Install the screw.

      Torque: 0.9 N*m (9.0 kgf*cm, 8.0 in.*lbf) 

      Fig 3: Locating Driver Monitor Bracket Screw
      G04950906Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL STEERING COLUMN COVER (for Upper Side) 
    1. Connect the connector.
    2. Attach the claw and 4 clips to install the cover.
      3. Fig 4: Identifying Steering Column Cover Clips
      G04950905Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSTALL STEERING COLUMN COVER (for Lower Side) 
    1. Attach the 2 claws to install the cover.
    2. Install the 3 screws.
      3. Fig 5: Locating Steering Column Cover Screws
      G04950904Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. CHECK SRS WARNING LIGHT 
    1. Check the SRS warning light (see CHECK MODE PROCEDURE ).
scientia non olet · About LEMON Manuals