Inspection Procedure

CHECK FOR DTC (ELECTRONICALLY CONTROLLED BRAKE SYSTEM)
1. Check for DTCs (See HOW TO PROCEED WITH TROUBLESHOOTING ).
OK: Electronically controlled brake system DTC is not output.

NG: GO TO ELECTRONICALLY CONTROLLED BRAKE SYSTEM (See HOW TO PROCEED WITH TROUBLESHOOTING ).

OK: Go to next step
CHECK FOR DTC
1. Clear the DTC (see DTC CHECK / CLEAR ).
2. Recheck for DTC (see DTC CHECK / CLEAR ).
OK: DTC C1A50 is not output.

NG: REPLACE HYBRID VEHICLE CONTROL ECU (See REMOVAL ).

OK: USE SIMULATION METHOD TO CHECK (See HOW TO PROCEED WITH TROUBLESHOOTING ).