Clock & Power Outlets: Clock: Installation
- INSTALL CLOCK ASSEMBLY
- Attach the 2 claws to install the clock.
- INSTALL MULTI-DISPLAY ASSEMBLY WITH BRACKET (See INSTALLATION )
- INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (See INSTALLATION )
- INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY (See INSTALLATION )
- INSTALL REAR UPPER CONSOLE PANEL (See INSTALLATION )
- INSTALL NO. 3 BOX PANEL (See INSTALLATION )
- INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (See INSTALLATION )
- INSTALL INSTRUMENT PANEL FINISH PANEL END LH (See INSTALLATION )
- INSTALL INSTRUMENT PANEL FINISH PANEL END RH (See INSTALLATION )
- CONNECT CABLE TO NEGATIVE BATTERY TERMINAL NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (see INITIALIZATION ).
- INSTALL BATTERY SERVICE HOLE COVER LH (See INSTALLATION )
- INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (See INSTALLATION )