Battery Smart Unit: Installation

INSTALL BATTERY SMART UNIT
CAUTION: Wear insulated gloves.

Fig 1: Locating Battery Voltage Sensor And Nut
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Install the battery smart unit and the ground cable with the nut
  Torque: 7.5 N*m (77 kgf*cm, 66 in.*lbf)
  NOTE:
  - Make sure that the ground cable stopper is securely inserted in the hole.
  - Make sure that the ground cable is installed on top of the bracket for the battery smart unit.
    
    Fig 2: Locating Battery Smart Unit And Nut
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the 3 connectors to the battery smart unit
INSTALL HV BATTERY JUNCTION BLOCK ASSEMBLY (See INSTALLATION )
INSTALL HV BATTERY TERMINAL BLOCK (See INSTALLATION )
INSTALL HYBRID VEHICLE CONVERTER (See INSTALLATION )
INSTALL UPPER HV BATTERY COVER SUB-ASSEMBLY (See INSTALLATION )

Fig 3: Locating Battery Smart Unit Connectors
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL CONDENSER (See INSTALLATION )
INSTALL NO. 1 HV BATTERY COVER INTAKE DUCT (See INSTALLATION )
INSTALL POWER STEERING CONVERTER WIRE (See INSTALLATION )
INSTALL NO. 1 HV BATTERY SHIELD SUB-ASSEMBLY (See INSTALLATION )
INSTALL HV BATTERY
See INSTALLATION